Link Search Menu Expand Document
EMDtool

Summary

SVPWM_Modulator Basic Modulator.

Instantiation:

this = SVPWM_Modulator(UDC, fs), where

  • UDC = DC-link voltage

  • fs = switching frequency

    PROPERTIES

  • SVPWM_Modulator/TPWM is a property.

  • SVPWM_Modulator/Tp is a property.

  • SVPWM_Modulator/U0 is a property.

  • SVPWM_Modulator/U1 is a property.

  • SVPWM_Modulator/U2 is a property.

  • SVPWM_Modulator/U3 is a property.

  • SVPWM_Modulator/U4 is a property.

  • SVPWM_Modulator/U5 is a property.

  • SVPWM_Modulator/Uangles is a property.

  • SVPWM_Modulator/Ubus is a property.

  • SVPWM_Modulator/Uref is a property.

  • SVPWM_Modulator/Uvectors is a property.

  • SVPWM_Modulator/f1 is a property.

  • SVPWM_Modulator/t0 is a property.

  • SVPWM_Modulator/t1 is a property.

  • SVPWM_Modulator/t2 is a property.

  • SVPWM_Modulator/t3 is a property.

  • SVPWM_Modulator/t4 is a property.

  • SVPWM_Modulator/t5 is a property.

  • SVPWM_Modulator/t6 is a property.

  • SVPWM_Modulator/ts is a property.

  • SVPWM_Modulator/uvectors is a property.

Methods

Class methods are listed below. Inherited methods are not included.

* SVPWM_Modulator Basic Modulator.

Instantiation:

this = SVPWM_Modulator(UDC, fs), where

  • UDC = DC-link voltage

  • fs = switching frequency

* U(this, t) Instantaneous voltage.

Uterminal = U(this, t, varargin) returns the terminal potentials measured against an arbitraty reference point. For instance, for the typical 3-phase inverter bridge, the output would be a 3x1 vector of the output voltages of each half-bridge, measured agains the “ground”. Help for SVPWM_Modulator/U is inherited from superclass MODULATOR

* getting reference voltage vector

* RESET Reset graphics object properties to their defaults.

RESET(H) resets all properties having factory defaults on the object identified by handle H to their default values. If h is a figure, MATLAB does not reset PaperPosition, PaperUnits, Position, Units or WindowStyle. If h is an axes, MATLAB does not reset Position and Units.

For example, RESET(GCA) resets the properties of the current axis. RESET(GCF) resets the properties of the current figure.

See also CLA, CLF, GCA, GCF, HOLD.

* set_Udq Set supply voltage components

set_Udq(this, Udq) Help for SVPWM_Modulator/set_Udq is inherited from superclass MODULATOR

* set_f Set fundamental supply frequency.

set_f(this, f) Help for SVPWM_Modulator/set_f is inherited from superclass MODULATOR